-
Custom Straight Bevel Gear for Motors
This custom-made Straight Bevel Gear is designed for use in motorsports vehicles that demand high performance and durability. Made of high-strength steel and precision machined, this gear offers efficient power transmission and smooth operation under high-speed and high-load conditions.
-
20CrMnTi Spiral Bevel Gears for Agricultural Machinery
The material used for these gears is 20CrMnTi, which is a low-carbon alloy steel. This material is known for its excellent strength and durability, making it suitable for heavy-duty applications in agricultural machinery.
In terms of heat treatment, carburization was employed. This process involves introducing carbon into the surface of the gears, resulting in a hardened layer. The hardness of these gears after heat treatment is 58-62 HRC, ensuring their ability to withstand high loads and prolonged use.
-
2M 20 teeth bevel gear
A 2M 20 teeth bevel gear is a specific type of bevel gear with a module of 2 millimeters, 20 teeth, and a pitch circle diameter of approximately 44.72 millimeters. It is used in applications where power must be transmitted between shafts that intersect at an angle.
-
industrial bevel gears used in industrial gearbox
This module 10 spiral bevel gears are used in industrial gearbox. Usually the large bevel gears used in industrial gearbox will be ground with high precision gear grinding machine ,with stable transmission ,lower noise and an inter-stage efficiency of 98% . Material is 18CrNiMo7-6 with heat treat carburizing 58-62HRC , accuracy DIN6 .
-
18CrNiMo7-6 ground spiral bevel gear set
This module 3.5 spiral bevel gear set was used for high precision gearbox .Material is 18CrNiMo7-6 with heat treat carburizing 58-62HRC ,grinding process to meet accuracy DIN6 .
-
OEM bevel gear set for helical bevel gearmotors
This module 2.22 bevel gear set was used for helical bevel gearmotor .Material is 20CrMnTi with heat treat carburizing 58-62HRC ,lapping process to meet accuracy DIN8 .
-
Spiral bevel gears for agriculture gearbox
This set of spiral bevel gear was used in agriculture machinery .
The gear shaft with two splines and threads which connects with spline sleeves .
The teeth was lapped ,the accuracy is ISO8 .Material :20CrMnTi low carton alloy steel .Heat treat :Carburization into 58-62HRC .
-
Gleason bevel gear for tractors
The Gleason bevel gear used for agriculture tractors.
Teeth: Lapped
Module :6.143
Pressure Angle :20°
Accuracy ISO8 .
Material :20CrMnTi low carton alloy steel .
Heat treat :Carburization into 58-62HRC .
-
DIN8 bevel gear and pinion in bevel helical gearmotors
The bevel gear and pinion was used in bevel helical gearmotors .Accuracy is DIN8 under lapping process .
Module :4.14
Teeth : 17/29
Pitch Angle :59°37”
Pressure Angle :20°
Shaft Angle :90°
Backlash :0.1-0.13
Material :20CrMnTi ，low carton alloy steel .
Heat Treat : Carburization into 58-62HRC .
-
Alloy steel Lapped bevel gear sets in gearmotor
The lapped bevel gear set was used in different types of gearmotors Accuracy is DIN8 under lapping process .
Module:7.5
Teeth : 16/26
Pitch Angle :58°392”
Pressure Angle :20°
Shaft Angle :90°
Backlash :0.129-0.200
Material :20CrMnTi ，low carton alloy steel .
Heat Treat : Carburization into 58-62HRC .
-
Spiral Bevel Gear Set In Automotive Gearboxes
The spiral bevel gear set used in automotive industry ,wehicles generally use rear drive in terms of power, and are driven by a longitudinally mounted engine manually or through an automatic transmission. The power transmitted by the drive shaft drives the rotational movement of the rear wheels through the offset of the pinion shaft relative to the bevel gear or crown gear.
-
Lapped Bevel Gear For Industrial Gearboxes
The gears used in industrial gearboxes usually are lapping bevel gears instead of grinding bevel gears .Because they industrial gearboxes have less requirement for noise but demands longer gears life and high torque.
