• Transmission case lapping bevel gears with right-hand direction

    Transmission case lapping bevel gears with right-hand direction

    The use of high quality 20CrMnMo alloy steel provides excellent wear resistance and strength, ensuring stability under high load and high speed operating conditions.
    Bevel gears and pinions, spiral differential gears and transmission case spiral bevel gears are precisely designed to provide excellent rigidity, reduce gear wear and ensure efficient operation of the transmission system.
    The spiral design of the differential gears effectively reduces the impact and noise when the gears mesh, improving the smoothness and reliability of the entire system.
    The product is designed in right-hand direction to meet the requirements of specific application scenarios and to ensure coordinated work with other transmission components.

  • spiral bevel gears for agriculture gearbox

    spiral bevel gears for agriculture gearbox

    This set of spiral bevel gear was used in agriculture machinery .
    The gear shaft with two splines and threads which connects with spline sleeves .
    The teeth was lapped ,the accuracy is ISO8 .Material :20CrMnTi low carton alloy steel .Heat treat :Carburization into 58-62HRC.

  • 20CrMnTi Spiral Bevel Gears for Agricultural Machinery

    20CrMnTi Spiral Bevel Gears for Agricultural Machinery

    The material used for these gears is 20CrMnTi, which is a low-carbon alloy steel. This material is known for its excellent strength and durability, making it suitable for heavy-duty applications in agricultural machinery.

    In terms of heat treatment, carburization was employed. This process involves introducing carbon into the surface of the gears, resulting in a hardened layer. The hardness of these gears after heat treatment is 58-62 HRC, ensuring their ability to withstand high loads and prolonged use.

  • 2M 20 teeth bevel gear

    2M 20 teeth bevel gear

    A 2M 20 teeth bevel gear is a specific type of bevel gear with a module of 2 millimeters, 20 teeth, and a pitch circle diameter of approximately 44.72 millimeters. It is used in applications where power must be transmitted between shafts that intersect at an angle.

  • OEM bevel gear set for helical bevel gearmotors

    OEM bevel gear set for helical bevel gearmotors

    This module 2.22 bevel gear set was used for helical bevel gearmotor .Material is 20CrMnTi with heat treat carburizing 58-62HRC ,lapping process to meet accuracy DIN8 .

  • Spiral bevel gears for agriculture gearbox

    Spiral bevel gears for agriculture gearbox

    This set of spiral bevel gear was used in agriculture machinery .

    The gear shaft with two splines and threads which connects with spline sleeves .

    The teeth was lapped ,the accuracy is ISO8 .Material :20CrMnTi low carton alloy steel .Heat treat :Carburization into 58-62HRC .

  • Gleason bevel gear for tractors

    Gleason bevel gear for tractors

    The Gleason bevel gear used for agriculture tractors.

    Teeth: Lapped

    Module :6.143

    Pressure Angle :20°

    Accuracy ISO8 .

    Material :20CrMnTi  low carton alloy steel .

    Heat treat :Carburization into 58-62HRC .

  • DIN8 bevel gear and pinion in bevel helical gearmotors

    DIN8 bevel gear and pinion in bevel helical gearmotors

    The bevel gear and pinion was used in bevel helical gearmotors .Accuracy is DIN8 under lapping process .

    Module :4.14

    Teeth : 17/29

    Pitch Angle :59°37”

    Pressure Angle :20°

    Shaft Angle :90°

    Backlash :0.1-0.13

    Material :20CrMnTi ,low carton alloy steel .

    Heat Treat : Carburization into 58-62HRC .

  • Alloy steel Lapped bevel gear sets in gearmotor

    Alloy steel Lapped bevel gear sets in gearmotor

    The lapped bevel gear set was used in different types of gearmotors Accuracy is DIN8 under lapping process .

    Module:7.5

    Teeth : 16/26

    Pitch Angle :58°392”

    Pressure Angle :20°

    Shaft Angle :90°

    Backlash :0.129-0.200

    Material :20CrMnTi ,low carton alloy steel .

    Heat Treat : Carburization into 58-62HRC .

  • Spiral Bevel Gears Used In Industrial Gearbox

    Spiral Bevel Gears Used In Industrial Gearbox

    Spiral bevel gears are often used in Industrial gearboxes , the industrial boxes with bevel gears are used in many different industries ,mainly used to change the speed and the direction of transmission. Generally, bevel gears are ground.