-
Gleason bevel gear for tractors
The Gleason bevel gear used for agriculture tractors.
Teeth: Lapped
Module :6.143
Pressure Angle :20°
Accuracy ISO8 .
Material :20CrMnTi low carton alloy steel .
Heat treat :Carburization into 58-62HRC .
-
DIN8 bevel gear and pinion in bevel helical gearmotors
The bevel gear and pinion was used in bevel helical gearmotors .Accuracy is DIN8 under lapping process .
Module :4.14
Teeth : 17/29
Pitch Angle :59°37”
Pressure Angle :20°
Shaft Angle :90°
Backlash :0.1-0.13
Material :20CrMnTi ，low carton alloy steel .
Heat Treat : Carburization into 58-62HRC .
-
Alloy steel Lapped bevel gear sets in gearmotor
The lapped bevel gear set was used in different types of gearmotors Accuracy is DIN8 under lapping process .
Module:7.5
Teeth : 16/26
Pitch Angle :58°392”
Pressure Angle :20°
Shaft Angle :90°
Backlash :0.129-0.200
Material :20CrMnTi ，low carton alloy steel .
Heat Treat : Carburization into 58-62HRC .
-
Spiral Bevel Gear Set In Automotive Gearboxes
The spiral bevel gear set used in automotive industry ,wehicles generally use rear drive in terms of power, and are driven by a longitudinally mounted engine manually or through an automatic transmission. The power transmitted by the drive shaft drives the rotational movement of the rear wheels through the offset of the pinion shaft relative to the bevel gear or crown gear.
-
Lapped Bevel Gear For Industrial Gearboxes
The gears used in industrial gearboxes usually are lapping bevel gears instead of grinding bevel gears .Because they industrial gearboxes have less requirement for noise but demands longer gears life and high torque.
-
Ground Bevel Gear For Construction Machinery Concrete Mixer
These ground bevel gears are used in construction machinery calls concrete mixer .In construction machinery ,bevel gears are generally only used to drive auxiliary devices. According to their manufacturing process, they can be manufactured by milling and grinding, and no hard machining is required after heat treatment. This set gear is grinding bevel gears ,with accuracy ISO7 ,material is 16MnCr5 alloy steel.
-
Zero Bevel Gears Zero Degree Bevel Gears
Zero Bevel Gear is the spiral bevel gear with a helix angle of 0°, The shape is similar to straight bevel gear but is a kind of spiral bevel gear .
-
Straight Bevel Gear Used In Differential Gear Unit
The straight bevel gear used in differential gear unit for tractor , The rear output bevel gear transmission mechanism of the tractor gearbox, the mechanism includes a rear drive drive bevel gear shaft and a rear output gear shaft arranged perpendicular to the rear drive drive bevel gear shaft. The bevel gear, the rear output gear shaft is provided with a driven bevel gear that meshes with the driving bevel gear, and the shifting gear is sleeved on the rear drive driving bevel gear shaft through a spline, characterized in that the driving bevel gear and the rear drive driving The bevel gear shaft is made into an integral structure. It can not only meet the rigidity requirements of power transmission, but also have a deceleration function, so that the small gearbox set on the rear output transmission assembly of the traditional tractor can be omitted, and the production cost can be reduced..
-
Spiral Gear For High Precision Speed Reducer
This set of gears was grinded with accuracy ISO7 , used in bevel gear reducer ,bevel gear reducer is a type of helical gear reducer, and it is a special reducer for various reactors. , Long life, high efficiency, stable operation and other characteristics, the performance of the whole machine is far superior to the cycloidal pinwheel reducer and the worm gear reducer, which has been widely recognized and applied by users.
-
Spiral Bevel Gears Used In Industrial Gearbox
Spiral bevel gears are often used in Industrial gearboxes , the industrial boxes with bevel gears are used in many different industries ,mainly used to change the speed and the direction of transmission. Generally, bevel gears are ground.
-
Miter Gear Set With Ratio 1:1
Miter gear is a special class of bevel gear where the shafts intersect at 90° and the gear ratio is 1:1 .It is used to change the direction of shaft rotation without change in speed .
