• Spur Gear Used In Agricultural equipment

    Spur Gear Used In Agricultural equipment

    Spur gear is a type of mechanical gear that consists of a cylindrical wheel with straight teeth projecting parallel to the gear’s axis. These gears are one of the most common types and are used in a wide range of applications.

    Material:16MnCrn5

    Heat treatment: Case Carburizing

    Accuracy:DIN 6

  • High Precision Spur Gear Used In Agricultural equipment

    High Precision Spur Gear Used In Agricultural equipment

    Spur gear is a type of mechanical gear that consists of a cylindrical wheel with straight teeth projecting parallel to the gear’s axis. These gears are one of the most common types and are used in a wide range of applications.

    Material:20CrMnTi

    Heat treatment: Case Carburizing

    Accuracy:DIN 8

  • High precision Spur gear used in Agricultural equipments

    High precision Spur gear used in Agricultural equipments

    Spur gears are commonly used in various agricultural equipment for power transmission and motion control. These gears are known for their simplicity, efficiency, and ease of manufacturing.

    1) Raw material  

    1) Forging

    2) Pre-heating normalizing

    3) Rough turning

    4) Finish turning

    5) Gear hobbing

    6) Heat treat carburizing 58-62HRC

    7) Shot blasting

    8) OD and Bore grinding

    9) Spur gear grinding

    10) Cleaning

    11) Marking

    12) Package and warehouse

  • High precision planet carrier used in planetary gearbox

    High precision planet carrier used in planetary gearbox

    Planet carrier is the structure that holds the planet gears and allows them to rotate around the sun gear.

    Mterial:42CrMo

    Module:1.5

    Tooth:12

    Heat treatment by : Gas nitriding 650-750HV, 0.2-0.25mm after grinding

    Accurancy: DIN6

  • High precision small planet gear used in planetary gearbox

    High precision small planet gear used in planetary gearbox

    Planet gears are smaller gears that revolve around the sun gear. They are typically mounted on a carrier, and their rotation is controlled by the third element, the ring gear.

    Material:34CRNIMO6

    Heat treatment by : Gas nitriding 650-750HV, 0.2-0.25mm after grinding

    Accurancy: DIN6

  • DIN6 planetary gear used in planetary gearbox

    DIN6 planetary gear used in planetary gearbox

    Planet gears are smaller gears that revolve around the sun gear. They are typically mounted on a carrier, and their rotation is controlled by the third element, the ring gear.

    Material:34CRNIMO6

    Heat treatment by : Gas nitriding 650-750HV, 0.2-0.25mm after grinding

    Accurancy: DIN6

  • DIN6 Spur gear shaft used in planetary gearbox

    DIN6 Spur gear shaft used in planetary gearbox

    In a planetary gearbox, a spur gear shaft refers to the shaft on which one or more spur gears are mounted.

    The shaft that supports the spur gear, which can be either the sun gear or one of the planet gears. The spur gear shaft allows the respective gear to rotate, transmitting motion to the other gears in the system.

    Material:34CRNIMO6

    Heat treatment by : Gas nitriding 650-750HV, 0.2-0.25mm after grinding

    Accurancy: DIN6

  • High precision spur gear set used in Motocycle

    High precision spur gear set used in Motocycle

    Spur gear is a type of cylindrical gear in which the teeth are straight and parallel to the axis of rotation.

    These gears are the most common and simplest form of gears used in mechanical systems.

    The teeth on a spur gear project radially, and they mesh with the teeth of another gear to transmit motion and power between parallel shafts.

  • High precision cylindrical gear used in Motocycle

    High precision cylindrical gear used in Motocycle

    This High precision cylindrical gear is used in motocycle with high precision DIN6 which was obtained by grinding process .

    Material :18CrNiMo7-6

    Module:2

    Tooth:32

  • External spur gear used in Motocycle

    External spur gear used in Motocycle

    This external spur gear is used in motocycle with high precision DIN6 which was obtained by grinding process .

    Material :18CrNiMo7-6

    Module:2.5

    Tooth:32

  • DIN6 Spur gear set used in Motocycle

    DIN6 Spur gear set used in Motocycle

    This spur gear set is used in motocycle with high precision DIN6 which was obtained by grinding process .

    Material :18CrNiMo7-6

    Module:2.5

    Tooth:32

  • Spur Gear Used In Agricultural equipment

    Spur Gear Used In Agricultural equipment

    Spur gear is a type of mechanical gear that consists of a cylindrical wheel with straight teeth projecting parallel to the gear’s axis. These gears are one of the most common types and are used in a wide range of applications.

    Material:16MnCrn5

    Heat treatment: Case Carburizing

    Accuracy:DIN 6

12 Next > >> Page 1 / 2