-
DIN6 ground helical gear set
This helical gear set was used in reducer with high precision DIN6 which was obtained by grinding process . Material : 18CrNiMo7-6,with heat treat carburizing ,hardness 58-62HRC . Module : 3
Teeth :63 for helical gear and 18 for helical shaft .Accuracy DIN6 according to DIN3960 .
-
18CrNiMo7-6 ground spiral bevel gear set
This module 3.5 spiral bevel gear set was used for high precision gearbox .Material is 18CrNiMo7-6 with heat treat carburizing 58-62HRC ,grinding process to meet accuracy DIN6 .
-
Worm gear set used in worm gear reducer
This worm gear set was used in worm gear reducer ,the worm gear material is Tin Bonze and the shaft is 8620 alloy steel . Usually worm gear could not do grinding ,the accuracy ISO8 is ok and the worm shaft has to be ground into high accuracy like ISO6-7 .Meshing test is important for worm gear set before every shipping .
-
external spur gear for mining machinery
This external spur gear was used in mining equipment . Material : 20MnCr5 ,with heat treat carburizing ,hardness 58-62HRC . Mining Equipment means machinery directly used for mineral mining and enrichment operations , Including mining machinery and beneficiation machinery .Cone crusher gears are one of them we supplied regularly .
-
OEM bevel gear set for helical bevel gearmotors
This module 2.22 bevel gear set was used for helical bevel gearmotor .Material is 20CrMnTi with heat treat carburizing 58-62HRC ,lapping process to meet accuracy DIN8 .
-
DIN6 internal helical gear housing in high precision gears
DIN6 is the accuracy of the internal helical gear . Usually we have two ways to meet high accuracy .
1) Hobbing + grinding for internal gear
2) Power skiving for internal gear
However for small internal helical gear ,hobbing is not easy to process ,so normally we would do power skiving to meet the high accuracy and also high efficiency .For big internal helical gear ,we will use hobbing plus grinding method . After power skiving or grinding ,middle carton steel like 42CrMo will do nitriding to increase the hardness and resistance
-
spur gear shaft for construction machinery
This spur gear shaft used in construction machinery . Gear shafts in transmission machinery are usually made of 45 steel in high-quality carbon steel, 40Cr, 20CrMnTi in alloy steel, etc. Generally, it meets the strength requirements of the material, and the wear resistance is good. This spur gear shaft was made by 20MnCr5 low carbon alloy steel ,carburizing into 58-62HRC.
-
ground spur gears used in cylindrical reducer
These spur gears are used in cylindrical reducer ,which belongs to external spur gears . They were ground , high accuracy accuracy ISO6-7 .Material :20MnCr5 with heat treat carburizing ,the hardness is 58-62HRC .The ground process makes the noise small and increase gears life .
-
power skiving internal ring gear for planetary gearbox
The helical internal ring gear was produced by power skiving craft ,For small module internal ring gear we often suggest to do power skiving instead of broaching plus grinding ,since power skiving is more stable and also has high Efficiency ,it takes 2-3 minutes for one gear ,accuracy could be ISO5-6 before heat treat and ISO6 after heat treatment .
Module is 0.8 ,teeth :108
Material :42CrMo plus QT ,
Heat Treatment :Nitriding
Accuracy: DIN6
-
Helical ring gear housing for robotics gearbox
This helical ring gear housings was used in robotics gearboxes , Helical ring gears are commonly used in applications involving planetary gear drives and gear couplings. There are three main types of planetary gear mechanisms: planetary, sun and planet. Depending on the type and mode of shafts used as input and output, there are many changes in gear ratios and directions of rotation.
Material :42CrMo plus QT ,
Heat Treatment :Nitriding
Accuracy: DIN6
-
Spiral bevel gears for agriculture gearbox
This set of spiral bevel gear was used in agriculture machinery .
The gear shaft with two splines and threads which connects with spline sleeves .
The teeth was lapped ,the accuracy is ISO8 .Material :20CrMnTi low carton alloy steel .Heat treat :Carburization into 58-62HRC .
-
Gleason bevel gear for tractors
The Gleason bevel gear used for agriculture tractors.
Teeth: Lapped
Module :6.143
Pressure Angle :20°
Accuracy ISO8 .
Material :20CrMnTi low carton alloy steel .
Heat treat :Carburization into 58-62HRC .
